| TEX KAST 97T |
Hydraulic |
175-180 |
50#/Bag |
3400 |
A tabular based 97% alumina conventional vibratable castable. The higher alumina content gives the castable more resistance to metals and slag than other products with a lower alumina content. It is high in density, has low open porosity, excellent hot and cold strengths. Excellent for areas of extreme abrasion and chemical attack and is very low in iron and silica. |
| TEX KAST T |
Hydraulic |
170-175 |
50#/Bag |
3350 |
A 93-94% alumina conventional vibratable castable. The higher alumina content gives the castable more resistance to metals and slag than other products with a lower alumina content. It is high in density, has low open porosity, excellent hot and cold strengths. Applications include carbon black furnaces, electric arc furnace delta section and vacuum degassers. |
| TEX KAST 90T |
Hydraulic |
175-180 |
50#/Bag |
3300 |
A 89-90% alumina conventional vibratable castable. The higher alumina content gives the castable more resistance to metals and slag than other products with a lower alumina content. It is high in density, has low open porosity, excellent hot and cold strengths. This product performs well in many applications where more expensive higher alumina castables have been previously used. |
| TEX KAST 80 |
Hydraulic |
160-165 |
50#/Bag |
3200 |
A 80-82% alumina conventional vibratable castable offering high refractoriness and strengths. Tex Kast 80 resist erosion, thermal shock and slag attack exceptionally well. Applications include severe service, tundish covers, and lead furnace arches. |
| TEX KAST 30 |
Hydraulic |
140-145 |
50#/Bag |
3000 |
A 64-65% alumina conventional castable based on high quality mullite aggregates and a high purity, low iron calcium aluminate binder. It is available in coarse, regular and fine grain sizing's. It can be cast, gunned, or troweled into place. Applications include ladles, burner rings, ceramic kiln cars and rotary kiln firing hoods. |
| TEX KAST SUPER |
Hydraulic |
135-140 |
50#/Bag |
2800 |
A 55% alumina general purpose castable designed for use in areas where extra temperature resistance and volume stability is required for severe service conditions. It has good resistance to moderate abrasion. Applications include reheat furnaces, kilns, boilers and soaking pits. |
| TEX KAST C |
Hydraulic |
130-135 |
50#/Bag |
2600 |
A 50% alumina abrasion resistant castable. Applications include transfer lines and ducts, cyclones and dust collectors, vessel linings, and catalyst carrying lines. |
| TEX KAST D |
Hydraulic |
130-135 |
50#/Bag |
2650 |
A 45-46% alumina conventional castable that is a coarser version of Tex Kast HS. It is a general castable that offers good erosion resistance. |
| TEX KAST COARSE R |
Hydraulic |
130-135 |
50#/Bag |
2800 |
A 44% alumina coarse aggregate castable designed for use in areas of high abrasion and mechanical abuse. It has good volume stability through the service temperature range. Applications include car top, pier and decks, clinker cooler linings, chain section of rotary kilns and foundry pouring decks. |
| TEX KAST COARSE |
Hydraulic |
125-130 |
50#/Bag |
2600 |
A 44-45% coarse alumina conventional castable designed for use in areas of high abrasion and mechanical abuse. It has good volume stability throughout the service temperature range. Applications include car top, pier and decks, clinker cooler linings, chain section of rotary kilns and foundry pouring decks. |
| TEX KAST HS |
Hydraulic |
125-130 |
50#/Bag |
2650 |
A 44-45% alumina conventional castable that provides good erosion resistance, good abrasion resistance, and good volume stability. It is an excellent material for casting and is an excellent general purpose castable. Applications include incinerators, ceramic kilns, car tops, boilers, flues and ducts. |
| TEX KAST HS-G |
Hydraulic |
125-130 |
50#/Bag |
2650 |
A 44-45% alumina conventional castable that provides good erosion resistance, good abrasion resistance, and good volume stability. It is an excellent material for either casting or gunning, and has been formulated to provide very little rebound loss during gunning. |
| TEX KAST |
Hydraulic |
120-125 |
50#/Bag |
2600 |
A 42-43% alumina conventional castable designed for general conditions where normal service is required. Tex Kast comes in both normal and fine grain sizing. Applications include ceramic kiln car tops, coke oven doors and burner rings. |
| WESCO SAK MIX |
Hydraulic |
125-130 |
50#/Bag |
1200 |
A 44-45% alumina conventional castable which is caustic resistant. Commonly used in paper mills, caustic tanks, floors, low temperature heaters, power ash hoppers. |
| FIREPLACE PANEL MIX |
Hydraulic |
125-130 |
50#/Bag |
2300 |
A 51-52% alumina conventional castable designed specifically for fireplace panels. |
