| THERMO PAK 90 HS |
Heat |
180-185 |
50#/Box |
3300°F |
Designed for use in areas requiring high refractoriness, strength, and abrasion resistance. This is a 93% alumina, phosbonded product. Typical applications are electric furnace delta sections and channel furnaces. |
| THERMO PAK 85 |
Heat |
180-185 |
50#/Box |
3200°F |
A 83% alumina phosbonded plastic designed for lining or patching where high temperature, abrasion and severe spalling is common. Applications included electric furnace roof, tundish, ladles and rotary kilns. |
| THERMO PAK HA |
Heat |
165-170 |
50#/Box |
3100°F |
A high alumina, phosphate bonded, plastic refractory, has high refractoriness, high density, low porosity and is very resistant to ferrous and non ferrous metal penetration, many slags, spalling, cracking and abrasion. No forms required except in arches. |
| THERMO PAK XF |
Heat |
180-185 |
50#/Box |
3300°F |
A 90% alumina phosbonded, tabular based, hand placed, fine grained plastic for use in extreme service applications. It has high refractoriness, abrasion resistance, low porosity. Thermal shock resistance and good volume stability providing excellent resistance to ferrous and non-ferrous metal penetration and erosive gasses. |
| THERMO 90 FINE PLASTER |
Heat |
|
50#/Box |
3200°F |
A 90% alumina phos bonded, fine grain putty's designed for patching cracks and holes. |
| THERMO 85 FINE PLASTER |
Heat |
|
50#/Box |
3150°F |
A 85% alumina phos bonded, fine grain putty designed for patching cracks and holes. |
| THERMO 70 FINE PLASTER |
Heat |
|
50#/Box |
3100°F |
A 70% alumina phos bonded, fine grain putty designed for patching cracks and holes. |
| THERMO 50 FINE PLASTER |
Heat |
|
50#/Box |
3000°F |
A 50% alumina phos bonded, fine grain putty designed for patching cracks and holes. |
| THERMO CHROME 85 PLASTIC |
Heat |
185-190 |
50#/Box |
3300°F |
A chemically bonded, chrome-alumina plastic for use in extreme service applications. The high refractoriness and chromic oxide addition make this product ideally suited for areas of high abrasion, severe spalling, and slag attack. Typical applications are electric furnace delta sections, furnace sprouts, induction furnace caps and patching, and tundish pads. |
| THERMO CHROME 85 FINE PLASTIC |
Heat |
165-170 |
50#/Box |
3100°F |
Designed for use in areas of high abrasion and slag attack, but where service temperature does not call for a higher alumina product. |
| THERMO RAM 90 |
Heat |
190-195 |
50#/Box |
3300°F |
A 90% alumina bonded with an extremely strong phosbinder. They are suited for areas of sever spalling, abrasion and high temperature. Applications include electrical furnace roofs, channel furnaces, tundish pouring pads, soaking pits and ladle linings. |
| THERMO RAM 85 |
Heat |
180-185 |
50#/Box |
3200°F |
A 85% alumina bonded with an extremely strong phosbinder. They are suited for areas of severe spalling, abrasion and high temperature. Applications included electrical furnace roofs, channel furnaces, tundish pouring pads, soaking pits and ladle linings. |
| THERMO RAM 70 |
Heat |
170-175 |
50#/Box |
3100°F |
A 70% alumina bonded with an extremely strong phosbinder. They are suited for areas of severe spalling, abrasion and high temperature. Applications include electrical furnaces, tundish pouring pads, soaking pits and ladle linings. |
| THERMO CHROME N-MIX |
Heat |
190-195 |
50#/Box |
3300°F |
Designed as a complete lining for channels furnaces. This product has excellent resistance to slag attack and abrasion. |
| VIBRA THERM 90 |
Heat |
180-190 |
50#/Box |
3300°F |
A 90% alumina phosbonded granular refractory designed for installation by vibration. This material is ready for use as it comes from the container. Applications include ladles, channel furnaces, tundish, etc. |
| VIBRA THERM 85 |
Heat |
175-185 |
50#/Box |
3200°F |
A 85% alumina phosbonded granular refractory designed for installation by vibration. This material is ready for use as it comes from the container. Applications include ladles, channel furnaces, tundish, etc. |
| VIBRA THERM 70 |
Heat |
165-170 |
50#/Box |
3150°F |
A 70% alumina phosbonded granular refractory designed for installation by vibration. This material is ready for use as it comes from the container. Applications include ladles, channel furnaces, tundish, etc. |
| VIBRA THERM HA |
Heat |
155-160 |
50#/Box |
3100°F |
A mullite based, phosphate bonded, granular refractory designed for installation by vibration. Supplied in a ready to use form, it eliminates the need for mixing equipment on site. |
| VIBRA THERM 50 |
Heat |
155-160 |
50#/Box |
3050°F |
A 50% alumina phos bonded, fine grain putty designed for patching cracks and holes. |
