THERMO GATE MORTAR |
Heat |
|
50#/pail |
3200°F |
A volume stable, high alumina, phos-bonded mortar designed particularly for slide gates. |
LADLE MORTAR CS |
Heat |
|
50#/pail 900#/Drum |
3200°F |
A 84% alumina phosphate bond, pumpable mortar designed for laying high alumina brick. It is also an excellent mortar for dipping tundish brick. Optimized particle sizing and a high solids content aid in forming a tight dense seal minimizing metal penetration. It has high refractoriness, a strong phosphate bond and offers a smooth consistency with good workability and easy pumping. Special manufacturing techniques are used to produce a extremely consistent product with extended shelf life. |
THERMO 8 MORTAR |
Heat |
|
50#/Pail |
3150°F |
A 80% alumina phosphate bonded, mortar designed for laying high alumina brick. It has high refractoriness, a strong phosphate bond and offers a smooth consistency with good workability. |
HT 85 CR |
Heat |
|
50#/Pail |
3300°F |
A high alumina phosphate bonded mortar with 3% chrome added for increased resistance to slag penetration. It has high refractoriness, a strong phosphate bond and offers a smooth consistency with good workability. |
TEX BOND SUPER 32 |
Air |
|
50#/Pail |
3100°F |
A bauxite base mortar, having excellent resistance to joint penetration. |
TEX BOND SUPER |
Air |
|
50#/Pail |
3000°F |
A super duty air setting mortar. Resistant to shock and corrosion. |
TEX BOND SUPER H |
Air |
|
50#/Pail |
3000°F |
A super duty air setting mortar with a heavier consistency. Resistant to shock and corrosion. |
TEX BOND SUPER DRY |
Air |
|
60#/Pail |
3000°F |
A kyanite base super duty air setting dry mortar. |
TEX BOND Caulking Tubes |
Air |
|
15#/Pail |
2900°F |
A 37.5% alumina air set mortar designed for laying alumina brick. It has high refractoriness and offers a smooth consistency with good workability. |
LADLE SEAL G |
Air |
|
50#/Pail |
3000°F |
A graphitic parting, and veneering compound. It is designed to extend the life of refractory working linings. When used as a slag release. This coating has excellent resistance to molten metal and slag penetration. Regular usage can significantly extend the life of ladle linings and make slag clean up and hard refractory linings. |
PRO COAT S |
Air |
|
50#/Pail |
3100°F |
A coating designed to resist sulfur attack and penetration. Used in industries and applications burning high sulfur fuels to extend and protect the life of hard refractory linings. |
AR CEMENT |
Hydraulic |
|
75#/Pail |
2600°F |
A high quality, dry, cement bonded, silica based mortar for laying brick. It is designed to provide excellent resistance to most acids. |